TPU 95A (Thermoplastic Polyurethane) is a flexible, rubber-like filament with excellent elasticity, abrasion resistance, and shock absorption. With a Shore hardness of 95A, it balances flexibility with structural integrity. Ideal for phone cases, gaskets, seals, vibration dampeners, wearables, and any application requiring elasticity and durability.
Recommended Printing Settings
| Parameter | Value |
|---|---|
| Drying Settings (Blast Drying Oven) | 70 °C |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 220–230 °C: 30–80 mm/s | 230–250 °C: 80–150 mm/s |
| Bed Temperature | 35–50 °C |
| Printing Speed | 30–150 mm/s |
Physical Properties
| Property | Value |
|---|---|
| Density | 1.21 g/cm³ |
| Vicat Softening Temperature | 78 °C |
| Heat Deflection Temperature | 56 °C |
| Melting Temperature | 215 °C |
| Melt Index | 28.7 g/10 min |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile Strength | 38 MPa |
| Breaking Elongation Rate | ≥ 500 % |
| Flexural Strength | 16.5 MPa |
| Flexural Modulus | 58 MPa |
| Impact Strength | No Break |
Disclaimer: The values presented in this document are typical and intended for reference purposes only. Actual results may vary depending on printing conditions, equipment, environment, and post-processing methods. NE Solution recommends performing your own testing to validate suitability for your specific application.
